Home > Technical Articles

IEC60320 Gauge for Plug & Pin List

Application:

Chuangxin Instruments offers a wide range of gauge to meet the most common standards including those from IEC, EN, UL, GB,DIN,VDE and others. Such standards require the checking of size & definition etc. these gauges are constructed from senior stainless steel and appropriate steel with a hardness of at least 60 HRC and a roughness according to standard require. Each gauge is supplied with a certificate of calibration.

Conforms To:

IEC60320

Specification:

Standard	Product Name
IEC60320-1-Figure 2	"Go" gauge for connectors to standard sheet C1
IEC60320-1- Figure4	"Go" gauge for connectors to standard sheet C5
IEC60320-1- Figure5	"Go" gauge for connectors to standard sheet C7
IEC60320-1- Figure5A	"Go" gauge for side-entry connectors to standard sheet C7
IEC60320-1- Figure6	"Not Go" gauge for connectors to standard sheet C1
IEC60320-1- Figure7	"Not Go" gauge for connectors to standard sheet C1,C5 and C7
IEC60320-1- Figure8	"Not Go" gauge for connectors to standard sheet C1 and C7
IEC60320-1- Figure9	"Not Go" gauge for appliance inlets to standard sheet C8,C8A and C8B
IEC60320-1- Figure9A	"Go" gauge for connectors to standard sheet C9
IEC60320-1- Figure9B	"Not Go" gauge for connectors to standard sheet C9
IEC60320-1- Figure9C	"Go" gauge for appliance inlets to standard sheet C10
IEC60320-1- Figure9F	"Go" gauge for connectors to standard sheet C13
IEC60320-1- Figure9G	"Not Go" gauge for connectors to standard sheet C13 and C17
IEC60320-1- Figure 9H	"Go" gauge for appliance inlets to standard sheets C14, C16 AND C18
IEC60320-1- Figure 9J	"Go" gauge for connectors to standard sheet C15
IEC60320-1- Figure 9K	"Go" gauge for connectors to standard sheet C17
IEC60320-1- Figure 9L	"Go" gauge for connectors to standard sheet C19
IEC60320-1- Figure 9M	"Go" gauge for appliance inlets to standard sheet C20 and C24
IEC60320-1- Figure 9N	"Go" gauge for connectors to standard sheet C21
IEC60320-1- Figure 9P	"Go" gauge for appliance inlets to standard sheet C22
IEC60320-1- Figure 9Q	"Go" gauge for appliance inlets to standard sheet C23
IEC60320-1- Figure 9R	"Not Go" gauge for connectors to standard sheet C13,C15 and C17
IEC60320-1- Figure 9S	"Go" gauge for connectors to standard sheet C15A
IEC60320-1- Figure 9T	"Go" gauge for appliance inlets to standard sheet C16A
IEC60320-1- Figure 22	Blades for checking the resisitance against deformation of the front part of the connector to standard sheet C7
IEC60320-1- Figure 27	Gauges for checking the distance form the engagement face of connectors to the point of first contact