UL 498 2012 Plugs and Receptac

UL 498 Plugs and Socket Outlets Gauge. According to standard UL 498:2012....

BS1363 Plugs Socket Outlets Ga

BS1363 Plugs Socket Outlets Gauges. According to standard BS1363....

VDE0620 Plugs and Socket Outle

VDE0620 Plugs and Socket Outlet Gauge. According to standard VDE 0620....

IEC 62368 Test Probe Kits

Meets IEC 62368. Accessibility probes are used to test the size of openings to e...

IEC 61010 Test Probe Kits

Meets IEC61010. Accessibility probes are used to test the size of openings to en...

IEC 60598 Test Probe Kits

Meets IEC 60598. Accessibility probes are used to test the size of openings to e...

DIN 40 050 Test Probes for IP

Meets IDIN 40 050 Test Probe for the IP Code Testing for protection of persons a...

IEC 60529 Test Probes for The

Meets IEC 60529 Access probes for the tests for protection of persons against ac...

IEC 60601 Test Probe Kits

Meets IEC 60601. Accessibility probes are used to test the size of openings to e...

IEC 60950 Test Probe Kits

Meets IEC 60950. Accessibility probes are used to test the size of openings to e...

IEC 61032 Test Probes for Veri

IEC 61032 Access Test Probe Kit. ...

E27 Go Not Go Gauges of Finish

E27 Lamp Cap Gauges According to IEC60061....

E26 Go-NoGo gauge of Finished

E26 Lamp Cap Gauge According to IEC60061....

E17 Go-NoGo gauge of Finished

E17 Lamp Cap Gauge According to IEC60061....

E14 GO and Not Go Gauges of Fi

E14 Lamp Cap Gauge According to IEC60061....

E26 Lamp Cap Gauge of IEC60061

E26 Lamp Cap Gauge of IEC60061-3....

E14 Lamp Cap Gauge of IEC60061

E14 Lamp Cap Gauge of IEC60061-3...

E12 Go Not Go Gauge of Finishe

E12 Lamp Cap Gauge According to IEC60061....

B22 Go Not Go Gauge of Finishe

B22 Lamp Cap Gauge According to IEC60061....

B22 Lamp Cap Gauges of IEC6006

B22 Lamp Cap Gauge According to IEC60061...

B15 Go Not Go Gauge of Finishe

B15 Lamp Cap Gauge According to IEC60061....

B15 Lamp Cap Gauges of IEC6006

B15 Lamp Cap Gauge According to IEC60061...

7006-46-3 G5 Go and Not Go Gau

7006-46-3 G5 Go and Not Go Gauge for Unmounted Bi-pin Cap (Not for Use on Finish...

7006-44-4 G13 Go and Not Go Ga

Go and not go gauge for unmounted bi-pin cap(not for use on finished lamps) G13,...

7006-45-4 G13 Go Gauge for Bi-

G13 Go Gauge for Bi-Pin Cap on Finished Lamp, 7006-45-4. According to standar...

E27 Lamp Cap Gauge of IEC60061

E27 Lamp Cap Gauge According to IEC60061...

IPX1 IPX2 Fixed Type Vertical

This machine is used for electrical and electronic equipment enclosure protectio...

IPX1 IPX2 Rain Spray Test Cabi

IPX1 IPX2 Rain Spray Test Cabinet applied to test the shell’s waterproof effect ...

IPX5 and IPX6 Rain Spray Test

IPX5 and IPX6 Rain Spray Test Apparatus simulates the water drip environment to ...

IPX7 Water Immersion Resistanc

Water immersion resistance test cabinet/IPX7 water proof testing device is used ...

IPX8 Water Immersion Tank

IPX8 Water Immersion Tank is designed according to the relevant standard require...

Water Jets Nozzle Test Device

The IPX5-6 Jet Test Set consists of a jet handle that is equipped with a pressur...

Hand-held Water Spray Nozzle T

The Spray Tester IPX 3/4 is a hand-held test device to verify protection against...

Calibration Device of Spring H

Spring Impact Hammer Calibrator IEC60068-2-7-5-1997 Appendix B requirements of ...

IPX3-4 Oscillating Tube Test D

The ipx3/4 waterproof test chamber is strictly designed according to IEC60529. I...

IPX3 - IPX4 Oscillating Tube T

The main role of IPX3/4 Oscillating Tube Test Chamber is to test products storag...

850nm Hand-held Infrared Irrad

Infrared Illuminance Pocket Radiometer Pocket Radiometer, Pocket Dosimeter, P...

IP3X Test Probe Pin with 3N Th

IP3X Test Probe Pin is the necessary tool to proceed protecting electric shock t...

IP2X Test Finger Probe with 50

IP2X Test Finger Probe is a precision test probe made according to Figure 2 (Fig...

50mm Diameter Test Steel Ball

The Impact Ball 50mm is designed to test impact according to IEC, UL, and CSA st...

PA100A UL Articulate Probe wit

Mainly used for the inspection to prevent the body touch dangerous live parts,he...

UL 60950-1 Figure NAF.2 & NAF.

This product is used for testing access to document shredders. The Jointed Acces...

IEC60335-2-9 clause 3 figure 1

one set with 5 pcs, the diameter is: 110 mm, 145mm, 180mm, 220mm, 300mm; Base a...

Universal Spring Hammer

Spring-Operated Impact Hammer are used to check the durability of enclosure for ...

IK08 Impact Energy Hammer of 5

The spring Hammer consists of three principal parts: the body, the striking elem...

Spring Hammer with Energy Impa

The Impact Hammer simulated the mechanical impact to which electrical equipment ...

Multiple Energy Spring Hammer

The Spring Hammer is examined with accessibility probes to determine access to c...

Unjointed Test Finger - Test P

The Rigid Test Finger is a precision test probe made according to Figure 7 (Fig....

2,5mm Test Rod - Test Probe C

Test Probe C is the necessary tool to proceed protecting electric shock test of ...

Short Test Pin - Test Probe 13

This pin probe is intended to verify the protection against access to hazardous ...

Straight Test Probe - Test Pro

Straight Test Probe ( Test Probe D) is the necessary tool to proceed protecting ...

Jointed Test Finger - Test Pro

The Jointed Test Finger is a precision test probe made according to Figure 2 (Fi...