Home > Technical Articles

The All Products Corresponding Standard

Description	Standards
Jointed Test Finger	IEC/CEI EN 61032 IEC/CEI EN 60884-1 IEC/CEI EN 60529 CEI 23-50
Jointed Test Finger With Lenght Of 100 mm	IEC/CEI EN 60335-2-64
Jointed Test Finger with Insulated Part and Dynamometric Handgrip with and Reference Marks To Forces of 10-20-30-40-50 N	IEC/CEI EN 61032 IEC/CEI EN 60884-1 IEC/CEI EN 60529 CEI 23-50 IEC/CEI EN 60335-1
Jointed Test Finger With Insulated Disc ø 125 mm	IEC/CEI EN 60335-2-14
Jointed Test Finger With Insulated Cylinder ø 50 mm	IEC/CEI EN 60335-1
Unjointed Test Finger with Insulated Part and Dynamometric Handgrip with and Reference Marks To Forces of 10-20-30-40-50 N	IEC/CEI EN 60950 IEC/CEI EN 60335-1
Unjointed Test Finger with Dynamometric Handgrip and Reference Marks to Forces Of 10-20-30-40-50 N	IEC/CEI EN 60065 IEC/CEI EN 61032
Unjointed Test Finger With Dynamometric Handgrip and Reference Marks To Forces Of 10-20-30-40-50-75 N	IEC/CEI EN 60065 IEC/CEI EN 61995-1 IEC/CEI EN 61032
Short Taper Test Pin ø 3 To 4 Mm – Length 15 mm	IEC/CEI EN 60601-1 IEC/CEI EN 61032 IEC/CEI EN 60335-1
Test Cone	IEC/CEI EN 61032 IEC/CEI EN 60335-1
Gauge ø 1 mm, Force Of 1 N, for Checking Non-Accessibility Of Live Parts	IEC 62196-1 IEC/CEI EN 60884-1 CEI 23-50
Gauge ø 2,5 mm, Force Of 3 N, For Checking Non-Accessibility Of Live Parts	IEC 62196-1 IEC/CEI EN 60884-1 CEI 23-50
Test Sphere ø 50 mm with Handle and Contact Cable	IEC/CEI EN 61032 IEC/CEI EN 60529
Test Finger Nail	IEC/CEI EN 60335-1
Test Rod ø 2,5 mm, Length 100 mm, With Stop Sphere ø 35 mm and Contact Cable	IEC/CEI EN 61032 IEC/CEI EN 60529
Test Rod ø 1 mm, Length 100 mm, with Stop Sphere ø 35 mm and Contact Cable	IEC/CEI EN 61032 IEC/CEI EN 60529
Test Probe ø 12 mm, Length 80 mm with Dynamometric Handgrip and Reference Marks To Forces Of 10-20-30-40-50 N	IEC/CEI EN 60950 IEC/CEI EN 61010-1
Small Finger Probe ø 8,6 mm	EN 71-1 IEC/CEI EN 60335-2-75 IEC/CEI EN 61032
Small Finger Probe ø 5,6 mm	IEC/CEI EN 60601-1-11 EN 71-1 IEC/CEI EN 60335-2-75 IEC/CEI EN 61032
Flat Gauge From 3x1 mm, Force Of 20 N, for Checking Non-Accessibility Of Live Parts	IEC 62196-1 IEC/CEI EN 60884-1 CEI 23-50
Test Pin ø 1 mm, Length 20 mm	UL 6500 BS 1363-2 IEC/CEI EN 60065 BS 1363-1
Long Test Pin ø 4 mm, Length 50 mm	IEC/CEI EN 60335-2-6 IEC/CEI EN 61032
TEST PROBE Ø 12,7 mm, Length 80 mm with Dynamometric Handgrip And Reference Marks To Forces Of 50-60-70-80-90-100 N	UL 197
Test Knife with Dynamometric Handgrip And Reference Marks To Forces Of 5 Pounds	UL 244 A UL 749
Test Probe for Food Waste Disposal Units	IEC/CEI EN 61032
“UL” Jointed Test Finger	UL 60950 UL 1083 UL 982 UL 73 UL 873
Test Probe for Fan Blades	CSA C22.2 No. 113-08 UL 471
Test Probe ø 9,5 mm, Length 101,6 mm for Accessibility Determination	UL 471
Test Probe ø 12,7 mm, Length 101,6 mm for Film-Coated Wire	UL 325 UL 484 CSA C22.2 No. 195 UL 471
Test Hook	UL 6500 IEC/CEI EN 60601-1
Wedge Probe	IEC/CEI EN 60950 UL 60950
Test Probe ø 6,4 mm for Hand-Supported Enclosure	UL 763
Test Pin Dia. 4x100 mm for Accessibility Tests	IEC/CEI EN 61010-1
Test Probe for Uninsulated Live Parts	UL 325 UL 507
Test Probe ø 75 mm with An Hemispherical End	IEC/CEI EN 60335-2-6
Test Probe To Verify The Accessibility On Flatirons	UL 1005
Test Rod Diam. 8 mm, Length 150 mm	IEC/CEI EN 60335-2-64 IEC/CEI EN 60335-2-14
Test Probe ø 40 mm with An Hemispherical End	IEC/CEI EN 60335-2-54 IEC/CEI EN 60335-2-64 IEC/CEI EN 60335-2-14
Small Test Probe	UL 498
Large Test Probe	UL 498
Probe Intended for Use With Lamp Rated 600 V. or Less	UL 496
Test Bar From 50x5 mm	IEC/CEI EN 61032
Test Rod ø 0,5 mm, Length 90 mm	IEC/CEI EN 61032
Test Rod ø 25 mm, Length 150 mm	IEC/CEI EN 61032
Test Probe ø 100 mm with An Hemispherical End	IEC/CEI EN 60335-2-27
Probe Intended for Use With Lampholder Rated Between 600 V. and 1000 V.	UL 496 CSA C22.2 N° 43-08
Puncture Probe	UL 325
Probe for Table Mounted and Handheld Appliances ø 6,3 mm	CSA C22.2.195
Probe for Table Mounted and Handheld Appliances ø 12,5 mm	CSA C22.2.195
Test Cone	UL 1278
Test Rod for Interlock Concealment	IEC/CEI EN 60335-2-25 IEC/CEI EN 60335-2-90
Impact Test Apparatus	IEC/CEI EN 60335-2-92 IEC/CEI EN 60335-2-107 IEC/CEI EN 60335-2-67
Ball Pressure Test Device	IEC/CEI EN 60335-10-2 IEC/CEI EN 60309-1 CEI 23-50 IEC/CEI EN 60669-1 IEC/CEI EN 60884-1 CEI EN 50083-1 IEC/CEI EN 60335-1 IEC/CEI EN 60320-1 IEC/CEI EN 60598-1
Glow Wire Test Apparatus	IEC/CEI EN 60695-2-10
Needle Flame Test Apparatus	IEC/CEI EN 60695-2-2 IEC/CEI EN 60695-11-5
Tracking Test Apparatus	IEC/CEI EN 60112
Steel Sphere Diam. 50 mm for Impact Test	IEC/CEI EN 60950 IEC/CEI EN 60335-2-91 IEC/CEI EN 60335-2-90 IEC/CEI EN 60439-4
Steel Sphere Diam. 50,8 mm for Impact Test	IEC/CEI EN 60335-2-69 IEC/CEI EN 60335-2-72 IEC/CEI EN 60335-2-68 IEC/CEI EN 60335-2-67 UL 325
Steel Sphere Diam. 40 mm for Impact Test	IEC 61721
Steel Sphere Diam. 75 mm for Accessibility Test	IEC/CEI EN 60335-2-24 IEC/CEI EN 60335-2-89
Steel Sphere Diam. 100 mm for Impact Test	EN 356 IEC/CEI EN 60335-2-91
Dielectric Strength Test Instrument	IEC/CEI EN 60065
Hand-Held Device to Verify Protection Against Spraying and Splashing Water (Spray Nozzle) – IPX3 and IPX4 Degrees	ISO 26053 DIN 40050 IEC/CEI EN 60529 IEC/CEI EN 60068-2-18
Test Device To Verify Protection Against Water Jets (Hose Nozzles) – IPX5 and IPX6 Degrees	ISO 26053 DIN 40050 IEC/CEI EN 60529 IEC/CEI EN 60068-2-18
Test Device To Verify Protection Against Spraying and Splashing Water (Oscillating Tube) – IPX3 and IPX4 Degrees	ISO 26053 DIN 40050 IEC/CEI EN 60529 IEC/CEI EN 60068-2-18
Load for Testing Rotating Spits	IEC/CEI EN 60335-2-9 IEC/CEI EN 60335-2-6
Test Corner for Heating Test	IEC/CEI EN 61010-1 IEC/CEI EN 60335-1 UNI CIG 7166 IEC/CEI EN 60601-1 EN 613 EN 30-1-1
Pans for Testing On Gas Burners	EN 30-1-1
Foot Probe	UNI EN 836 IEC/CEI EN 60335-2-2 DIN 1856 EN 13684