Wire/Cable Termination Options

How to finish off my electrical assembly

---

Whether it's a Wire Harness or a Cable Assembly, find the best way to terminate the ends. Below is a quick reference chart of common termination options to help you decide which is best for you.

Wire Termination

---

End Cut		Wire Slit		Wire Strip		Cutback
Wire is cut even at customer specified length.		Where parallel wire is used, ends can be separated from each other to customer specifications.		Wire ends are "stripped" of their insulation material to expose the inner copper strands.		Wires are terminated at different lengths according to customer specifications.

Cable Termination

---

Blunt Cut		Remove Outer Jacket		ROJ & Stripped Wires		Cut Back Wires
Cable is cut even at customer specified length.		Also known as R.O.J., the outer insulating cable jacket is removed to expose the inner wires. Length is determined by customer.		Outer cable jacket is removed and wire ends are stripped of insulating material.		Outer cable jacket is removed and wires are cut and terminated at different lengths.

Termination Connectors

---

Quick Connect		Ring Terminal		Spade/Fork Terminal		Ferrule Terminal
Available In: • Un-Insulated • Pre-Insulated • Fully-Insulated • Right-Angle (Flag)		Used to attach product with screw or bolt. Perfect for agroundconnection. Also available in locking.		Similar to a Ring Terminal, but removable without completely unscrewing bolt or screw.		For use with Terminal Blocks. Used to crimp and secure bare copper strands.  Also available in a double for crimping 2 separate wires.