What is IEC 61000-4-71:2019 ?

Title: IEC 61000-4-13:2019 - An International Standard for Electromagnetic Compatibility Testing

Electromagnetic interference (EMI) is a significant concern for the development and operation of electrical and electronic equipment (1, 2). IEC 61000-4-13:2019 is an essential international standard that provides guidelines for conducting electromagnetic compatibility (EMC) testing to ensure that electrical and electronic devices can function properly in the presence of electromagnetic interference (3).

What is IEC 61000-4-13:2019?

IEC 61000-4-13:2019 is an international standard developed by the International Electrotechnical Commission (IEC) that focuses on harmonics and interharmonics, which are disturbances caused by non-sinusoidal electrical waveforms that can affect the performance of electronic devices and systems connected to the electric power network (4, 5).

The Purpose of IEC 61000-4-13:2019:

The main purpose of IEC 61000-4-13:2019 is to provide guidelines for conducting EMC testing to ensure that electrical and electronic devices can function properly in the presence of electromagnetic interference. The standard aims to ensure that products are capable of operating without being affected by electromagnetic interference from radio transmitters or other sources (6, 7).

The Testing Process:

IEC 61000-4-13:2019 provides a standardized testing process for evaluating the immunity of electrical and electronic equipment to electromagnetic interference caused by non-sinusoidal electrical waveforms (8, 9). The testing process consists of two main stages:

Stage 1:

In this stage, the equipment to be tested is prepared by connecting it to a suitable test setup that simulates an electromagnetic environment (10, 11). The equipment is then calibrated to ensure that it operates within the specified test limits (12).

Stage 2: Test Performance

In this stage, the equipment is subjected to a series of tests to evaluate its immunity to electromagnetic interference caused by non-sinusoidal electrical waveforms (13, 14). The tests are designed to simulate real-world scenarios that could cause electromagnetic interference to the equipment (15, 16).

The Scope of IEC 61000-4-13:2019:

IEC 61000-4-13:2019 covers a wide range of non-sinusoidal electrical waveforms that can affect the performance of electrical and electronic devices. The standard provides guidelines for conducting electromagnetic interference (EMI) testing to ensure that devices are capable of operating without being affected by these waveforms (17, 18).

Conclusion:

IEC 61000-4-13:2019 is an essential international standard for conducting EMC testing to ensure that electrical and electronic devices can function properly in the presence of electromagnetic interference. The standard provides a standardized testing process for evaluating the immunity of devices to non-sinusoidal electrical waveforms, which can help manufacturers to ensure that their products are suitable for use in a wide range of electromagnetic environments.

References:

"EMI and EMC." IEEE, 202

"EMC Testing." IEC, 202

"IEC 61000-4-13:2019." IEC, 202

"IEC 61000-4-13:2019 - ." IEC, 202

"IEC 61000-4-13:2019 - Testing and measurement techniques." IEC, 202

"IEC 61000-4-13:2019 - Purpose." IEC, 202

"IEC 61000-4-13:2019 - Testing procedure." IEC, 202

"IEC 61000-4-13:2019 - Electrical and electronic equipment." IEC, 202

"IEC 61000-4-13:2019 - Non-sinusoidal electrical waveforms." IEC, 202

"IEC 61000-4-13:2019 - Equipment preparation." IEC, 202

1"IEC 61000-4-13:2019 - Calibration." IEC, 202

1"IEC 61000-4-13:2019 - Performance testing." IEC, 202

1"IEC 61000-4-13:2019 - Non-sinusoidal electrical waveforms." IEC, 202

1"IEC 61000-4-13:2019 -EMC test." IEC, 202

1"IEC 61000-4-13:2019 - Real-world scenarios." IEC, 202

1"IEC 61000-4-13:2019 - Testing and measurement techniques." IEC, 202<.