IEC 60238 Figure 11 Temper

IEC 60238 Figure 11 Temperature Rise Test Cap of E40. Acc...

IEC 60238 Figure 11 Temper

IEC 60238 Figure 11 Temperature Rise Test Cap of E27. Acc...

IEC 60238 Figure 11 Temper

IEC 60238 Figure 11 Temperature Rise Test Cap of E14. Acc...

IEC 60238 Figure 5 Torque

IEC 60238 Figure 5 Torque Test Caps of E27. According to ...

EN 50075 Figure 2. Gauge f

EN 50075 Figure 2. Gauge for Interchangeability. Accordin...

EN 50075 Figure 1 - Go Gau

EN 50075 Figure 1 - Go Gauges and Not Go Gauges. Accordin...

CEE7 C12 Gauges for 10/16A

CEE7 C12 Gauges for 10/16A 250V Two-pole Plugs with Side Ear...

CEE7 C11 Gauges for 10/16A

CEE7 C11 Gauges for 10/16A 250V Two-pole Socket-outlets and ...

CEE7 C10 Gauges for 10/16A

CEE7 C10 Gauges for 10/16A 250V Two-pole Plugs. According...

CEE7 C9 Gauges for 2.5A 25

CEE7 C9 Gauges for 2.5A 250V and 10/16A 250V Two-pole Plugs ...

CEE7 C7 Gauges for 10/16A

CEE7 C7 Gauges for 10/16A 250V Two-Pole Socket-outlets. A...

CEE7 C3 Gauges for 10/16A

CEE7 C3 Gauges for 10/16A 250V Two-pole Socket-outlets. A...

CEE7 C2 Gauges for 10/16A

CEE7 C2 Gauges for 10/16A 250V Two-pole socket-outlets and T...

E27 Holder for Torque Test

Holder for torsion Test on Lamps with Screw Caps....

E14 Holder for Torque Test

Holder for torsion Test on Lamps with Screw Caps....

E40 Holder for Torque Test

Holder for torsion Test on Lamps with Screw Caps....

E40 Lamp Cap Torque Gauge​

Holder for torsion Test on Lamps with Screw Caps....

UL749 Fig.4 SB0504A Knife

According to standard UL 749 Figure 4 Knife Probe(SB0504A). ...

UL 498 Figure 123.4 SB1622

UL 498 Figure 123.4 SB1622E 4 oz (113 g) Ground Pin Accor...

UL 498 Figure 123.3 SB0704

UL 498 Figure 123.3 SB0704E 2 oz (57 g) Ground Pin Accord...

UL 498 Figure 123.2 SB1610

UL 498 Figure 123.2 SB1610 Test Pin B According to standa...

UL 498 Figure 123.1 SB1609

UL 498 Figure 123.1 SB1609A Test Pin A According to stand...

IEC 60884-1 Figure 13 Devi

The appliance conforms to the standard of IEC884 figure 13. ...

12 mm (0.472 in) Steel Hem

According to UL 1993:2012 clause 8.10.1...